Accessori per videocamere analogiche

1x DSMC2 Outrigger Handle. RED DSCM2 Outrigger Handle (p/n 720-0044). Used for 2 projects, brilliant handle that feels like a perfect balance distribution when shooting.

Mint condition monitor, only used a handful of times by me in studio environment. All original accessories and hard case included as new. The hard case has some scuffs on the outside. Includes a Sandisk Plus 240 GB SSD drive.

Selling my trusty Blackmagic Video Assist 4k due to recently leaving the industry to pursue another career. I've used it exclusively with my Sony A7s and it's been very well looked after its whole life. I bought it new in 2016 and have used it since for freelance work and some TV work too. I don't have the original box any more, however everything else is there, plus some extras - what you see in the photos is what you get. It also has the most recent firmware installed so you can now upload LUTS. It works with a range of SD cards, not just the ones on the Blackmagic website. I used it with 300x Lexar 128gb cards and SanDisk ones too.

Die Tasche ist aus Leder, innen mit rotem Stoff ausgestattet. Die Tasche ist aus Leder. Sie hat einen Clipverschluß und Stauraum. sie ist gebraucht mit Gebrauchsspuren, aber noch ganz gut erhalten.

(The No3 is, (I think) for Yvar 13mm f1.8 or f1.9 (from serial nos 616581) and 36mm f2.8 serial nos from 692851) is for 13mm f1.8. The No1 (code LEDUN) is for Switar 12.5mm f1.5 and Yvar 13mm f1.9 up to serial nos 616580, and Yvar 25mm f2.5 and 36mm f2.8 up to serial nos 692850.

4K 7” Monitor for use with cages, rigs and gimbals. Comes with everything displayed in the images including a battery. HDMI cable comes with a redirection adapter so it works with gimbals perfectly. Selling as I upgraded to a Atomos Ninja.

AtomOS 7.1. It has a 7” 10-bit 1500nit panel with the AtomHDR engine and HDMI connections to record and playback video to 4K/HD 10-bit ProRes/DNxHR. Video Resolution: 4K. Inputs: HDMI. Outputs: HDMI.

This product has been designed, machined and assembled in the United Kingdom and is part of the Shoot35 product range. The CINEbox is a 'Matte Box' device used in still photography and video. It connects to the end of a lens to block the sun or other light sources in order to prevent glare and lens flare.

The CINEfocus manual can be downloaded here in PDF format: CINEfocus Manual. Including the following features This product has been designed, machined and assembled in the United Kingdom and is part of the Shoot35 product range.

Full working order.

Fully featured Shoulder Rig kit gives new creative possibilities from amateurs to professionals and provides relaxation for extensive shooting hours. The included 4 black corners with a 90° angle feature a 30° short and 60° long leg.

Tilta TT-BMC-07 BMCC Rig . (12)Protection brackets for BMCC ( Cage ) 1PC. (4) Tilta MB-T05 new 4 4 lightweight matte box 1PC (Including top flag, 80mm/95mm/114mm lens adapters). (5) Tilta damped follow focus kit 1PC ( w/ 5pcs follow focus rings, 300mm&200mm steerwhip 1PC).

The 4K 3840 2160 ultra high definition supports four different pictures in one screen. Lilliput BM280-4K 28" 3G SDI 4K Monitor . Lilliput BM280-4K, one monitor but can be used as TV, support household and working-use.

1x DC accoppiatore (Dummy batteria). Alta qualità! Peso: 395g. Potenza di uscita: 5V 2A / 8V 5A / 12V 5A / 14.8 V / USB.

New top handle.

TILTA WLC-T03 Nucleus-M Wireless Follow Focus . The Nucleus-M is a wireless 3 Channel system. (1) Wireless Handle Left (Focus). (4) Follow Focus marking disks. (1) Wireless FIZ Hand Unit. (2) Brushless Wireless Motors with 19mm Rod Support and 15mm Rod Bushings.

Max load capacity: 1.5KG(Horizontal). Battery capacity: 1200Mah. 1 AC Adapter (US). 1 SK-EBH01 Electronic Ball Head. Item weight: 457g / 16.1oz. Item size: 6.5 9cm / 2.6 3.5in (H D).

Bracket to mount a monitor and Teradek receiver on a Preston FIZ3. The bracket has 2 slots for Cannon LP-E6 batteries (as used on 502 and 702 Small HD monitors), with a limo 2 pin lead to power a Teradek receiver, 2 batteries power the receiver for about 2 hours and 15 minutes depending on batteries.

Designed specifically for use with the Sony a6000, a6300, and a6500. Also fits a6000 and a6500. Features as listed on Tilta's website Quick release system quickly unmounts the cage from the baseplate.

CVP call this the Arri basic set for F5/F55. Its all in very good condition.

0% to 90% non-condensing. Relative Humidity. -20° to 45° C (-4° to 113° F). Storage Temperature. 0° to 40° C (32° to 104° F). Battery Life. LP-E6 Lithium-Ion battery included. Tri-Sync or Black Burst on expansion connector.

Anton mount is also available. V-Mount Battery Plate. • Compatible with Li V-Mount battery (Battery not included). Sincerely yours . WHAT'S INCLUDED.

(10)Protection brackets for BMCC ( Cage ) 1PC. (4) Tilta new 4 4 lightweight matte box 1PC (Including top flag, 80mm/95mm/114mm lens adapters). (5) Tilta FF-T03 damped follow focus kit 1PC ( w/ 5pcs follow focus rings, 300mm&200mm steerwhip 1PC).

TILTA Nucleus-M Brushless Wireless Follow Focus Motor . TILTA WLC-T03-M Nucleus-M Brushless Wireless Follow Focus Motor . (1) Brushless Wireless Follow Focus Motor. There is no MDR unit. Motor (no rail adapter): 0.419lb.

Oconnor O-focus. When coupled with the O-Focus Bridge, it yields a follow focus industry first; a 1:0.75 transmission ratio. A small ratio change can make a big ‘feel’ difference! One of the best follow focus on the market.

Supplied in full kit form as pictured. Full working order. We have everything tested and checked before being advertised for sale.

It is still an amazing HDR monitor and recorder, ideal for pro use and for follow focus work. New from Wex the Atomos Ninja Inferno is £1049. This is a great setup to extend the Panasonic GH4 to 10bit 422 ProRes recording which is what I was using it for.

COPESLIDER BAG - 60 CM UP TO 10KG. Take your COPESLIDER wherever you want and keep it protected with the special carrier bag provided. You can get the 60cm or the 100cm version, depending on your needs.

The contrast between the DJI Ronin and Tilta GR-T03 Tilta GR-T03 with battery 3.2kg, without battery 2.8kg. This Tilta GR-T03 is with low weight and high loading because many parts are made of carbon fiber.

Slide a pair of 19mm rods into the front mounting holes to mount your gear and line it up perfectly with the RED One. The Bridge Plate is strong enough to support a 30lbs zoom, three Preston DM-1 motors and a 6 x 6" studio matte box.

Supplied as pictured in good condition with accessories as shown. All supplied in custom made flight case. The kit has been tested and supplied in full working order. We have everything tested and checked before being advertised for sale.

We will be responsible for all the loss. We have everything tested and checked before being advertised for sale. Full working order.

This matte box is for lens fitting of 85mm. The matte box is light weight and supplied with 2 4x4 filter trays. We will be responsible for all the loss. We have everything tested and checked before being advertised for sale.

Handset tested and in perfect working order.

Our recently released and eagerly anticipated CINEfocus Pro Follow Focus is now available. The Dual Sided Handle can be removed from the CINEfocus Pro Follow Focus if you would like to use it as the Single Sided version and then reconnected as required.

Supplied with 95mm donut ring and 2x 4x4 filter trays. We will be responsible for all the loss. We have everything tested and checked before being advertised for sale.

The SHAPE Rod Bloc EVF Mount attaches onto 15mm rods and securely supports Alphatron, Cineroid, and other EVF systems. Two points of adjustability enable raising an EVF up and down and tilting it forward and back.

IMPORTANT: DSMC® TACTICAL TOP PLATE and DSMC TACTICAL RIGHT ADAPTOR are required to mount this item. DSMC SIDE HANDLE is not compatible when DSMC® TACTICAL RIGHT PLATE is attached. We have everything tested and checked before being advertised for sale.

Brand new

• Works great with SliderONE PRO. • Works great with edelkrone Wing. We no longer need these fantastic products. Excellent condition. (EU plug.). • Can pair and work with Motion Box or HeadPLUS. • 1/4" mounting port on bottom.

Tilta 3 TT-03-A DSLR Rig Follow focus Matt Box . Tilta 3 DSLR Rig Follow focus Matt Box . Red One (An extra 19mm rod adaptor needed). Follow focus 1PC. Follow focus handle 1PC. 300mm Rod 2PCS.

Tilta will produce the set ES-T37-A with wooden handle. 3, Panasonic GH4 GH5 Series quick release baseplate. 2, Panasonic GH4 GH5 Series Cage. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues.