Case nero per prodotti informatici 5.25" Drive Bays 2

$ Caratteristica -100% nuovissimo e di alta qualità. -Scatola protettiva trasparente caso per Raspberry Pi B . -Per proteggere il computer poco preferito contro danni, polvere e graffi. -C'è una plastica pellicola protettiva sulla superficie, può essere strappato fuori. -Dispone di slot per accedere in modo sicuro e veloce. -Semplice scatta su astuccio necessario assemblare. -Attraverso la custodia trasparente, tutto lo stato è visibile. -Dimensione: Circa 93 x 65 x 32 mm / 3,66 "x 2.56" x 1.2 6". -Avviso: Il prodotto è trasparente; alcune foto è scattate con pellicola su di esso. Modello disponibile: Raspberry Pi B rev 1.2 e Raspberry Pi 2 modello B specifica manuale inglese / non Spec dimensioni: 3,74 x 2,48 x 1.2 in 6 ( 9,3 centimetri x 6.5 cm x 3.

The Game Max Sapphire with its modern design, including 5mm Tempered Glass panels on the front and both sides, give this Gaming Mid Tower case a stylish look. The 3 x 120mm RGB fans included (situated at the front) will bathe your internal components in a soft glow, which can be seen through the Mirrored effect tempered glass panels. The USB3.0 ports (Transfer speeds up to 5Gbps), USB2.0 (Transfer speeds up to 480Mbps), located at the top of the case allow the user to have access to the latest devices, along with the HD Audio ports to give crystal clear sound. The 3-speed fan controller gives the user the ability to decide on either extra cooling (High speed), low noise (low speed), or to simply switch off the fan connected to the controller. A total of 7 fans can be installed into the system (3 x RGB fans are inc.

Scatola di alta qualita', facile da montare Questo prodotto puo' funzionare con Raspberry Pi 3 / Raspberry Pi 2 e B ! Colore: nero.

3 x 120mm RGB fans on the front and 1 x 120mm RGB fans on the rear are included, which makes this an ideal solution for the gaming enthusiast and an excellent cooling solution to help to keep the computer temperature low.

The Game Max Sapphire with its modern design, including 5mm Tempered Glass panels on the front and both sides, give this Gaming Mid Tower case a stylish look. The 3 x 120mm RGB fans included (situated at the front) will bathe your internal components in a soft glow, which can be seen through the Mirrored effect tempered glass panels. The USB3.0 ports (Transfer speeds up to 5Gbps), USB2.0 (Transfer speeds up to 480Mbps), located at the top of the case allow the user to have access to the latest devices, along with the HD Audio ports to give crystal clear sound. The 3-speed fan controller gives the user the ability to decide on either extra cooling (High speed), low noise (low speed), or to simply switch off the fan connected to the controller. A total of 7 fans can be installed into the system (3 x RGB fans are inc.

The Game Max Sapphire with its modern design, including 5mm Tempered Glass panels on the front and both sides, give this Gaming Mid Tower case a stylish look. The 3 x 120mm RGB fans included (situated at the front) will bathe your internal components in a soft glow, which can be seen through the Mirrored effect tempered glass panels. The USB3.0 ports (Transfer speeds up to 5Gbps), USB2.0 (Transfer speeds up to 480Mbps), located at the top of the case allow the user to have access to the latest devices, along with the HD Audio ports to give crystal clear sound. The 3-speed fan controller gives the user the ability to decide on either extra cooling (High speed), low noise (low speed), or to simply switch off the fan connected to the controller. A total of 7 fans can be installed into the system (3 x RGB fans are inc.

Due parti caso Raspberry Pi con bloccaggio pizzico / sblocco. Prese d'aria per mantenere Raspberry Pi fresco. Nota: Raspberry Pi non inclusi. La custodia in plastica 1x SainSmart ABS per Raspberry Pi Computer B accesso a tutti Port nero.

The Raspberry Pi is everybody's favourite little computer and it just got an upgrade! These cases protect the Raspberry Pi B from things like rogue wires that might short it out while still allowing full access to the board!

(Made from 20mmx20mm hardwood. All screws are Confirmat and is solid structure. Paint with three coat so look nice like Furniture :). GPU can be fit directly to Motherboard if need (enough room space).

Motherboard Support: Micro ATX(mATX), Mini ITX. Form Factor: Micro ATX. Sound & Vision. System Cabinet Features IO Ports: 2 x USB 2.0. Why Choose Us! Piano Black Shiny Fascia for a sleek finishing look.

The Game Max Titan PC case is an ATX gaming case and enhances our Game Max range further with a top cover with a removable dust filter, the front panel made from mesh steel gives the case high-end cooling. A perspex side window allows users to see their components bathed in the glow from the 3 x 120mm RGB fans (2 at the front and 1 at the rear), keeping your components both cool and colourful. A luxurious black interior and rolled edges for safety make's this design simply outstanding. This case supports ATX, Micro ATX and Mini ITX motherboards. Features: Case Type - ATX gaming case Front Panel - With removable metal mesh Top Panel - With removable metal mesh I/O Port - USB 2.0 x 2, USB 3.

CATCH - LATCH -CLIP. This is new feature and all we want to do is help you. We just human and can only do the best we can if you give the right information.

2x USB 2.0. 1x USB 3.0. Cooling Front: None. Cooling Top: None. Full black chassis. Case Cooling. Matt Black. Cooling Bottom: N/A.

The P100 is an ATX case that epitomizes cool,quiet,and sophistication. It features the Performance One series design and Quiet Computing technologies that minimize system noise. In addition to 7 expansion slots,the P100 also supports 2 tool-less 5.25” drives and 7 tool-less 3.5”/2.5” drives.

2U SERVER in rack chassis. 19 " NERO scaffale. -Colore: Solo nero. EAN Does Not Apply. ISBN Does Not Apply. Salvo errori ed omissioni (E & OE). Viene con il sacchetto vite. Maniglie smontabile.

These cases are ideal for anyone wishing to build their own server, DVR CCTV system, or DJ's. 2 x Front USB ports. 1 x Reset switch, 1 x KB-LK switch, 1 x Power switch behind lockable door. 1 x 3.5" floppy drive bay behind lockable door.

ITX - 1x 5.25" - 1x 2.5" - USB 3.0 - USB C - SD - 70x185x245 mm. Inter-Tech MW-02. Form factor: Desktop, Type: PC, Supported motherboard form factors: ITX. Width: 185 mm, Depth: 245 mm, Height: 70 mm.

Its unique design enables you to rotate the plate 360° in all 4 positions. Black 3D Printed case for Raspberry Pi 3 Model B to fit all UK plugs. Keep your Pi safe and tidy with this revolutionary case.

It provides tough protection for the Raspberry Pi Model B and PiFace 2 while providing access to connectors. Designed specially for the PiFace2 Digital this case gives you access to all the PiFace's input/outputs and the board's jumpers while protecting the PiFace and attached Raspberry Pi Model B .

Inter-Tech JX-500. Form factor: Desktop, Type: PC, Supported motherboard form factors: ITX. Supported hard disk drive sizes: 2.5". Width: 200 mm, Depth: 240 mm, Height: 65 mm. ITX - Mini-ITX - 2.5 " - Fan - USB - CE - Slim.

Front & Side Panel: With a tempered glass front panel and an attractive tempered glass side panel on the left side allows users to show off there internal components. USB Ports: Connector has both USB 3.0 and USB 2.0, to allow for use on boards that do not support USB 3.0 .

Raspberry Pi Old Cases. Raspberry Pi cases. Raspberry Pi bundle. Raspberry Pi 2. Raspberry pi. Our aim is simply to help Raspberry Pi users get the most out of their Raspberry Pi experience. 8 GB MicroSD Card - 8GB Class 10 with Android 4.2.2 Banana Pi.

The inclusion of a total of four pre-installed RGB-LED fans allows the case to unlock its full cooling potential. There is also a hard drive cage with brackets for two 3.5- or 2.5-" drives. TEMPERED GLASS SIDE/FRONT PANEL & FOUR PRE-INSTALLED RGB FANS.

Akasa Crypto Vesa Black computer caseMini ITX - 2.5 - 4000 RPM - USB x 2 with 80 watt adapter. Akasa Crypto Vesa Black computer case. Akasa Crypto Vesa. Type: PC, Material: Acrylonitrile butadiene styrene (ABS), Steel, Supported motherboard form factors: Mini-ITX.

The Prospect chassis is one of Xigmatek’s latest innovative small form factor chassis to date; it comes with 3 side tempered glass panels to beautifully display every component of the build, clearance for 130mm CPU cooler, and 260mm VGA, 2x pre-installed Xigmatek’s Solar Eclipse II LED fans on the front, PSU placement on the front for space optimization and most importantly, even though it’s a small chassis, it’s compatible for 120mm or 240mm (with the removal of the HDD mount) comprehensive liquid cooling system. Prospect is something that looks awesome from all angles! Features Three panel tempered glass design. Comes with 4 x 12cm Blue LED fans & 1 x 80mm Blue LED fan. Liquid cooling compatible.

CATCH - LATCH -CLIP. This is new feature and all we want to do is help you. We just human and can only do the best we can if you give the right information.

Compatibile con Raspberry Pi 2 e Pi 3, B e B (Raspberry Pi non incluso). Custodia black Raspberry Pi 2 & 3. Case Material ABS. Color Negro. EAN No aplicable. CP Cenes Vega (Granada): 18190. C / stazione 1.

Maker-Sphere Complete Raspberry Pi 3 Model B Quad Core 3.2" LCD TFT screen with 16gb Pre-loaded Raspbian (Black ). 16GB microSd card class 10 card with Raspbian and LCD driver ready to use. Raspberry Pi Old Cases.

Two 3.5” drive bays and three SSD mounts provide plenty of storage, and a top-mounted panel provides easy access to USB 3.0 and audio ports. ATX, Micro ATX, Mini ITX. 6x cooling mounts with support for 140/120mm fans or 240/120mm radiators.

Form factor: ATX, Extended ATX. -Colour: Black only. Front USB and Audio ports: 1 front USB port. Weight N/G: 11/14.5kg.

Antec 300 PC Veratile Mini Tower PC/Case Black. Quad graphics card - Matrox MGI QID-E128LPAF 128MB DDR2, PCIe x16 Quad DVI.

Akasa A-RA03-M1B - CaseFor Raspberry Pi 1 Model B /Raspberry Pi 2 Model B/Raspberry Pi 3 Model B/Asus Tinker Board. Akasa A-RA03-M1B. Width: 68.3 mm, Depth: 33.4 mm, Height: 92 mm. Akasa A-RA03-M1B - Case.

Raspberry Pi Old Cases. Raspberry Pi cases. Raspberry Pi bundle. Raspberry Pi 2. Raspberry pi. Our aim is simply to help Raspberry Pi users get the most out of their Raspberry Pi experience. Raspberry Pi and the Raspberry logo are trademarks of the Raspberry Pi Foundation.

Designed for entry level gaming builds, the GX200 mid-tower case by Antec sets the standard for fast, economical gaming builds. The rugged exterior styling is accentuated with a front intake grill that optimizes airflow and includes a removable dust filter.

$Case 100% Brand New and High Quality. Transparent protective box case for Raspberry Pi 2 & 3 To protect your Raspberry Pi against damages, dust and scratches. Easy access to all ports and slots. Simple snap on case box self-assembly needed. Picture in the description if needed Through the transparent case, all status lights visible. Material: Acrylic Colour: Transparent & black 9 layers and each layer is laser-cut from acrylic Fan DC 5V 0.2A mini cooling cooler fan Size (L x W x H): Approx. 30 x 30 x 10 mm / 11.8 x 11.8 x 3.9 inch Connector: 2 pin Rated Voltage: DC 5V Current: 0.

NZXT H700i Black-Red. The premium H700i is the vision of NZXT modern computers. The cabinet is also fitted with two coloured LEDs that mold the design of your computer. The Key Features of the NZXT H700i Black-and-White Computer Cabinet.

Phanteks first chassis with intergrate Digital RGB LEDs, the P350X is a case for every system. - Equipped with 1 x Phanteks 120mm fan. - Equipped with Phanteks' velcro cable ties. With the integrated Digital RGB lighting profiles, you can personalize your build with style.

At last it's here! The new SPi-Box from SB Components! This basic kit includes.

In need of a PC case that does not take up too much of the desk space but at the same time looking professionally on you office desk or in your study room? Cs-101 from the PGS-C series is the perfect choice. The case can be placed vertically or horizontally depending on your need. This case supports both Mini-ITX and Micro-ATX motherboards so you will have plenty of choice when shopping for the motherboards to be installed into this case. Key Features Slim type desktop PC chassis suitable for home and office use. The case is suitable for both vertical(stand included) or horizontal placement. Support Mini-ITX and Micro-ATX motherboards. Support 1x standard 5.25” bay and max. two 2.5 Support SFX power supply.

The Aerocool Cyber X Advance acrylic window case comes with a Red LED light and two red LED fans. Users can access the ODD bay and SD Card reader behind the unique translucent honeycomb front door panel design. For your storage needs, it supports two 3.5” bays and two 2.5” bays. You can fit a graphics card up to 360mm and a PSU up to 210mm. It also supports your choice of air or liquid cooling. For Air cooling enthusiasts you can squeeze in a 165mm cooler and for liquid cooling, just remove the ODD bay and slot in a 240mm radiator.

Raspberry Pi Caso. Si è in grado di immagini statiche di 3280 x 2464 pixel e supporta anche 1080p 30, 720p a 60 and640x480p60/90 dei video. Raspberry Pi accessori. · Si collega alla scheda Raspberry Pi tramite un cavo corto nastro (in dotazione).

Raspberry Pi Old Cases. Raspberry Pi cases. Raspberry Pi bundle. Raspberry Pi 2. Raspberry pi. Our aim is simply to help Raspberry Pi users get the most out of their Raspberry Pi experience. Raspberry Pi and the Raspberry logo are trademarks of the Raspberry Pi Foundation.

Fractal Design's. Midi Arc R2. Can hold plenty of fans or water cooling options. User guide. Nice little case had since 2013, has not been user modified. Nice case but it is a heavy one. Filters are original but still effective.